University of Valencia logo Logo University Research Institute on Robotics and Information and Communication Technologies (IRTIC) Logo del portal

  • LSYM
Representative picture of the project Gantry crane simulator
The gantry crane is used to loadin and unloading container ships. It has a weight close to 1000 tons, raises loads of over 50 tons and the operator is placed in a booth suspended more than 30 meters above the ground. So, a great skill for handling it is required.
Representative picture of the project RTG Crane Simulator
The RTG Crane Simulation System of the Modelling and Simulation Laboratory is an advanced system that will allow developing a comprehensive training programme for handling cranes of RTG type.
Representative picture of the project Simulador de Grúa Móvil
The Mobile Crane Simular (MHC) is built to cover a necesity of training of this king of cranes of general use that move by means of a wheel traction system (not guided by rails) around the port termina
Representative picture of the project Reach Stacker Crane Simulator
The Reach Stacker operates, like the Trastainer, in container terminals. This crane loads containers onto trucks and trains for transport.
Representative picture of the project Backhoe simulator
A backhoe, also called a rear actor or back actor, is a piece of excavating equipment or digger consisting of a digging bucket on the end of a two-part articulated arm. In the Laboratory of Modelling and Simulation we have designed a backhoe simulator using the most innovative techniques.
Representative picture of the project Forklift Truck Simulator (ForkLift)
Forklift Truck Simulator (ForkLift) of LSyM puts you at the controls of one of the most important vehicles of heavy duty industries. The truck is a vehicle poised at the back, which, using two forks, can transport and stack loads usually mounted on platforms or pallets.
Representative picture of the project Tower Crane Simulator
The Training System of the Tower Crane has two modules, integrated in a single application; on the one hand, the teaching material, that consists in a presentation for the monitoring of the theoretical course; and on the other hand, the Virtual Work Environment, that integrates a Tower Crane Simulator and with which practical exercises can be performed.
Representative picture of the project Telehandler Simulator
The simulator system reproduces with high degree of realism the working environment found in a building work. Telehandlers are versatile movile machines which can be fitted with a wide range of attachments. There are two main types of telehandlers: rotating and non-rotating
Representative picture of the project Bridge Crane Simulator
The simulator system reproduces with high degree of realism the working environment found in factory and warehouse facilities. Bridge Cranes are versatile machines used for vertical lifting/lowering of freely suspended and unguided loads.
 
1 2Next