This seminar will take place on the next 14th March in the 3.1.1 room of the ETSE-UV
The components and electronic systems of today require a great variety of technologies with greater frequency of operation to efficiently carry out the tasks of design and verification. The increase in the integration of different technologies in a very small place optimise the design and to make use of the best tools in the design process. A collection of specific tools only allow to solve different problems once in a blue moon. When these technologies are integrated with each other, you have the ability to improve the design as a whole and verify compliance with the corresponding specifications in a realistic simulation environment.
This seminar will analyse with practical examples the new technologies of design, simulation and test that Keysight offer: SI/PI/ETH/EMI/EMC and Measurement. These new abilities will help you to analyse a broad range of possible settings where optimise their products’ decisions and how to optimise and improve the future design possibilities.
Seminar schedule:
|
Schedule: |
Presentation |
|
08,45 a.m - 9 a.m |
Registration and presentation |
|
9 a.m. - 9,30 p.m. |
Introduction: Design Solutions and Simulations SI/PI/ETH/EMI/EMC |
|
9,30 a.m. - 11 a.m. |
SI/PI Design and Simulation: Consideration and Working Examples of Digital Buses and DDR Memory |
|
11 a.m - 11,30 a.m. |
Break with a coffee |
|
11,30 a.m. - 12,30 p.m. |
Test Systems to Verify I/PI/EMI/EMC |
|
12,30 p.m - 1,30 p.m. |
Challenges of a Complex Design with Digital and Analogical Mixed Signals SI, PI, ETH y EMI/EMC - Examples |
|
1,30 p.m |
Closing |
The registration to this seminar is free and the number of places is limited.
You can do your registration through the web page o calling to 800 000 154 or if you prefer, send a message with your contact information to contact contactcenter_spain@keysight.com, specifying the day and place you wish to attend.
